Error code
Beko Washing Machine Error Code E02
Quick answer
E02
Water is not entering the machine properly
First safe action
Turn the washing machine off and unplug it from the mains.
Meaning
Beko washing machine error code E02 usually appears when the appliance is not filling with water as expected. A supply issue, an inlet hose restriction, or an inlet valve fault are common starting points.
Likely causes
- Water tap closed or only partly open
- Inlet hose kinked or restricted
- Blocked inlet filter or inlet valve problem
Safe first checks
- Turn the washing machine off and unplug it from the mains.
- Check that the water supply tap is fully open and the inlet hose is not kinked.
- If it is safe and accessible, inspect the inlet filter for debris before testing again.
How to reset
- Restore power once the water supply checks are complete.
- Run a short programme to see whether the code clears.
When to call an engineer
If the code returns with a normal water supply, the inlet valve, wiring, or control system may need professional attention.
Safety warning
Disconnect the washing machine from the mains before checking any accessible hose, filter, or connection.
Useful hub links
Related fault codes
E01 for Beko Washing Machine
Door locking or door sensing problem
E03 for Beko Washing Machine
Water heating fault
E04 for Beko Washing Machine
Overflow or leak protection has been triggered
E08 for Beko Washing Machine
Water is not entering the machine properly
E05 for Beko Washing Machine
The machine is not draining water correctly
E06 for Beko Washing Machine
Motor drive or drum movement issue
Relevant guides
Frequently asked questions
Can I keep using a Beko washing machine with E02 showing?+
It is usually better to pause use until you have completed the safe first checks for E02, then test the machine with a short programme.
Will resetting clear E02 for good?+
A reset may clear a temporary interruption, but if E02 comes back after the first safe checks, the underlying fault still needs attention.