Error code
AEG E10: Water Supply Checks
AEG E10 points to a filling problem in the LF7E7431BI manual. Check the water supply, visible inlet hose and exact model before choosing further steps.
Quick answer
E10: The machine is not filling with water properly
Meaning
The machine is not filling with water properly
First safe check
Stop the machine, note the full display and find the model and full PNC on accessible paperwork or the rating label. Confirm that the manual matches.
Stop if
Leakage, burning smell, unusual heat, electrical tripping or water near electrics.
Who to call
Contact the manufacturer or a qualified appliance engineer if the code persists, the model does not match the guidance, access is unsafe or the next step involves internal parts. Provide the full model, code and checks already completed.
A severity label does not establish whether an appliance is safe to use. Follow the model-specific instructions and stop conditions. Follow the model’s isolation instructions before permitted maintenance. Do not reach wet or damaged electrical parts to unplug the appliance.
What does this error code mean?
The LF7E7431BI manual associates E10 with inadequate filling. It lists the tap, supply pressure, inlet hose and inlet filters as checks. AEG’s broader UK support article also covers water-flow problems, including installation that lets water run away as it fills.
Separate the symptom before proceeding: no water entering, very slow filling, and water entering then draining away are useful observations to give support. They do not prove that an inlet valve or pressure component has failed.
Why is this happening?
- A closed supply tap, interrupted supply or insufficient water pressure.
- A kinked inlet hose or restricted inlet filter.
- A drain-hose installation problem if water enters but immediately runs away; compare the exact model’s installation instructions.
Safe next steps
- Stop the machine, note the full display and find the model and full PNC on accessible paperwork or the rating label. Confirm that the manual matches.
- Switch off and unplug safely before examining the appliance. Do not continue if there is leakage, unusual heat or an electrical trip.
- Check the accessible supply tap is open and whether the household cold-water supply is working. If pressure is poor elsewhere too, contact the water supplier or a plumber as appropriate.
- Look for a visible trapped or kinked inlet hose without moving an awkward machine or loosening its fittings. If water enters then drains immediately, compare the visible drain-hose position with the exact installation instructions.
- If external supply checks are normal, ask AEG about the correct inlet-filter procedure for your PNC. Do not disconnect hoses without the manual’s isolation and water-control instructions or remove internal valves.
- Contact AEG if E10 remains or returns. Give the model, PNC and whether the machine did not fill, filled slowly or filled then drained.
Can I fix this myself?
MaybeThe external checks below may identify a simple cause. Persistent faults need model-specific service advice.
Safety boundary: Stop before internal diagnosis or any action that cannot be done safely. Disconnect power before permitted maintenance and let hot water cool.
What not to do
- Do not force the door or remove appliance panels.
- Do not buy a pump, valve or control board solely from the displayed code.
- Do not repeat resets while the cause remains unexplained.
Official manual
AEG LF7E7431BI washing machine user manual
The checked manual covers LF7E7431BI, edition 157070411-C-412024. AEG’s UK product page identifies PNC 914580514. Confirm your full PNC and revision with AEG; neither a 7000-series label nor a similar display proves this manual fits another machine.
Document 157070411-C-412024. Link and listed sections checked 31 October 2026.
- E10 filling and E20 drainage entries; switch-off precaution - printed pages 43–44
- Owner filter maintenance, controlled draining and restoring the drain system - printed pages 39–42
The links open the manufacturer PDF in a new tab. If your viewer ignores the page link, use the printed page numbers. Match your model and read the safety instructions before maintenance.
Open manufacturer PDF (free)When to call a technician
Contact the manufacturer or a qualified appliance engineer if the code persists, the model does not match the guidance, access is unsafe or the next step involves internal parts. Provide the full model, code and checks already completed.
Safety warning
Stop for leaks, a burning smell, unusual heat or electrical tripping. Keep clear of wet sockets and plugs. Do not force a locked door, remove appliance panels or test internal electrical parts.
Useful hub links
Other AEG washing machine codes
Relevant guide
Frequently asked questions
Does E10 mean the inlet valve has failed?+
No. The checked manual includes supply, hose and filter checks. A component fault needs diagnosis after the applicable external causes have been considered.
Why does the machine fill and drain straight away?+
AEG’s support guidance includes drain-hose installation as a possible cause of water-flow trouble. Compare the hose position with the matching manual; do not apply a generic height rule to every model.
Are E11, C1 or one beep necessarily the same as E10?+
AEG groups these displays in a support article, but that does not prove they are interchangeable on every model. Preserve the complete code or light pattern and check the manual for your full PNC.
Sources and review status
Model dependent · Last reviewed 31 October 2026
- AEG UK E10 water-flow support
manufacturer support · UK · checked 31 October 2026
UK E10 water-flow troubleshooting; water supply, inlet hose and drain installation checks. Related codes in the support article are not a whole-model alias guarantee.
- AEG LF7E7431BI official user manual
model manual · UK · checked 31 October 2026
LF7E7431BI: E10 filling and E20 drainage entries on page 44; owner filter maintenance and water precautions on pages 39–42.
- AEG UK LF7E7431BI product identification
manufacturer support · UK · checked 31 October 2026
UK model LF7E7431BI and product number 914580514; this does not establish compatibility with other models or PNC revisions.