Error code
Baxi Boiler 117 — Code Meaning
High system pressure when the full display is E117. The Czech DUOTEC service manual dated 15 February 2018 covers DUOTEC COMPACT, LUNA DUO-TEC, LUNA DUO-TEC MAX and NUVOLA DUO-TEC, including their listed + versions, with HAGC03 BX01 electronics. Match that document, boiler variant and full E-prefixed display. It does not establish applicability to every UK Baxi boiler or later version.
Quick answer
117: High system pressure when the full display is E117
Meaning
High system pressure when the full display is E117
First safe check
Photograph the full display, including alternating characters and suffixes.
Stop if
The warning remains, the appliance is not operating normally, or the next step requires internal access.
Who to call
Contact a Gas Safe registered engineer qualified for this boiler if the warning remains, the code is not explained in the matching manual, or any internal investigation is required.
Internal diagnosis and repair require a qualified professional. Follow only the model-approved user actions described below. Keep checks outside the casing and use only a manufacturer-approved reset where the manual allows it.
What does this error code mean?
The Czech DUOTEC main table’s E117/internal-566 row reports excessive system pressure above 2.9 bar. Page 32 also gives 2.7 bar in its troubleshooting prose while its adjacent list gives 2.9 bar. Those thresholds conflict within the original document, so this page does not infer a universal trigger, target pressure or filling instruction.
The Czech DUOTEC service manual dated 15 February 2018 covers DUOTEC COMPACT, LUNA DUO-TEC, LUNA DUO-TEC MAX and NUVOLA DUO-TEC, including their listed + versions, with HAGC03 BX01 electronics. Match that document, boiler variant and full E-prefixed display. It does not establish applicability to every UK Baxi boiler or later version.
The reported condition does not, by itself, establish which part needs replacement.
Why is this happening?
- The manufacturer describes: high system pressure when the full display is e117. The underlying cause requires assessment on the actual model.
Safe next steps
- Photograph the full display, including alternating characters and suffixes.
- Record the full model from accessible paperwork or an external label; do not dismantle the appliance to find it.
- Match the source below to your exact model manual before following any code-specific instructions.
- If the warning persists, the model is uncertain or the next step requires internal access, stop and contact a Gas Safe registered engineer qualified for this boiler.
Can I fix this myself?
NoUse only the external checks described here. The code alone does not justify a parts replacement.
Safety boundary: Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.
What not to do
- Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.
- Do not repeatedly reset an unexplained or returning warning, or buy parts solely from this display.
When to call a heating professional
Contact a Gas Safe registered engineer qualified for this boiler if the warning remains, the code is not explained in the matching manual, or any internal investigation is required.
Safety warning
Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.
Useful hub links
Other Baxi boiler codes
Relevant guide
Frequently asked questions
Does 117 identify a failed part?+
No. A code describes a reported condition, and the correct model documentation is needed before diagnosis.
Does this apply to every model?+
The Czech DUOTEC service manual dated 15 February 2018 covers DUOTEC COMPACT, LUNA DUO-TEC, LUNA DUO-TEC MAX and NUVOLA DUO-TEC, including their listed + versions, with HAGC03 BX01 electronics. Match that document, boiler variant and full E-prefixed display. It does not establish applicability to every UK Baxi boiler or later version.
Does this page establish a universal pressure threshold?+
No. The specified Czech manual gives 2.9 bar in the main table and both 2.7 and 2.9 bar on page 32. Match the exact product manual and ask a qualified engineer; do not drain or fill the system from a generic code page.
Sources and review status
Model dependent · Last reviewed 7 October 2026
- Baxi Czech DUOTEC service manual, 15 February 2018, PDF pages 1, 19, 32
model manual · EU · checked 7 October 2026
E117/internal 566 reports high system pressure in the main table (above 2.9 bar). Page 32 contains both 2.7-bar prose and a 2.9-bar list; no universal numeric threshold is inferred. The Czech DUOTEC service manual dated 15 February 2018 covers DUOTEC COMPACT, LUNA DUO-TEC, LUNA DUO-TEC MAX and NUVOLA DUO-TEC, including their listed + versions, with HAGC03 BX01 electronics. Match that document, boiler variant and full E-prefixed display. It does not establish applicability to every UK Baxi boiler or later version.