Error code
Beko Washing Machine Error Code E10
Water level or pressure sensing fault The most likely cause is pressure sensor issue. Check first: if safe to do so, check for obvious drainage or fill problems that may have triggered an incorrect level reading.
Quick answer
E10: what does it mean and how to fix
What does it mean?
Water level or pressure sensing fault
How to fix first
Turn the machine off and unplug it.
Why is this happening?
Pressure sensor issue
When should I call an engineer?
If water levels remain abnormal or the code returns repeatedly, the sensor system may need professional diagnosis.
What does this error code mean?
Beko washing machine error code E10 usually means the appliance is not reading the water level correctly. That can affect filling, draining, and how the programme advances.
In practice, E10 is commonly linked to Pressure sensor issue, Blocked pressure chamber or hose, or Control fault affecting level readings.
Start with this safe check: Turn the machine off and unplug it. If the code returns, the fault worsens, or the appliance does not behave normally, if water levels remain abnormal or the code returns repeatedly, the sensor system may need professional diagnosis.
Why is this happening?
- Pressure sensor issue
- Blocked pressure chamber or hose
- Control fault affecting level readings
How to fix this safely
- Turn the machine off and unplug it.
- If safe to do so, check for obvious drainage or fill problems that may have triggered an incorrect level reading.
- Avoid repeated resets if the machine is overfilling or stopping with water inside.
Reset steps
- Reconnect power after the machine has been left off briefly.
- Run a short programme only if the appliance is empty and appears safe.
When to call an engineer
If water levels remain abnormal or the code returns repeatedly, the sensor system may need professional diagnosis.
Safety warning
Disconnect the appliance from the mains before any checks and stop using it if there are signs of overfilling or leaking.
Useful hub links
Related pressure and level fault codes
After resolving this fault, use the right wash setting to help prevent repeat issues.
Relevant guide
Frequently asked questions
Can I keep using a Beko washing machine with E10 showing?+
It is usually better to pause use until you have completed the safe first checks for E10, then test the machine with a short programme.
Will resetting clear E10 for good?+
A reset may clear a temporary interruption, but if E10 comes back after the first safe checks, the underlying fault still needs attention.