Error code
Bosch Dishwasher E05 — Meaning and Safe Advice
Bosch US associates E05 with the wash-arm diverter circuit at the main control board. This is Bosch US guidance. Confirm the UK E-Nr and its manual before applying the definition; code meanings and fitted components can vary.
Quick answer
E05: Wash-arm diverter control-circuit fault in Bosch US guidance
Meaning
Wash-arm diverter control-circuit fault in Bosch US guidance
First safe check
Record the full model number and complete displayed code before attempting a remedy.
Stop if
The warning is active or recurring and the next step would require internal access.
Who to call
Contact the manufacturer or a qualified appliance technician with the model and full code. The display identifies a reported condition, not a confirmed replacement part.
Internal diagnosis and repair require a qualified professional. Follow only the model-approved user actions described below. Follow the model’s isolation instructions before permitted maintenance. Do not reach wet or damaged electrical parts to unplug the appliance.
What does this error code mean?
Bosch US associates E05 with the wash-arm diverter circuit at the main control board.
A generic water-level-sensor diagnosis is not supported by that reference.
This is Bosch US guidance. Confirm the UK E-Nr and its manual before applying the definition; code meanings and fitted components can vary.
Why is this happening?
- The manufacturer-reported condition is: wash-arm diverter control-circuit fault in bosch us guidance. An engineer must establish the underlying cause on the actual model.
Safe next steps
- Record the full model number and complete displayed code before attempting a remedy.
- Confirm that the manufacturer guidance below applies to that model. Do not use instructions for a different appliance or code suffix.
- Contact the manufacturer or a qualified appliance technician for diagnosis if the warning is active or recurring.
Can I fix this myself?
NoLimit your actions to the external checks and model guidance described here; internal diagnosis requires a professional.
Safety boundary: Do not open the cabinet, probe electrical circuits or bypass protective devices.
What not to do
- Do not open the cabinet, probe electrical circuits or bypass protective devices.
- Do not order replacement parts solely from the code or repeat resets to suppress a returning warning.
Common misdiagnoses
- A generic water-level-sensor diagnosis is not supported by that reference.
When to call a technician
Contact the manufacturer or a qualified appliance technician with the model and full code. The display identifies a reported condition, not a confirmed replacement part.
Safety warning
Do not open the cabinet, probe electrical circuits or bypass protective devices.
Useful hub links
Other Bosch dishwasher codes
Bosch Dishwasher E03 — Code Meaning
Main control-board relay fault
Bosch Dishwasher E04 — Meaning and Safe Advice
Heater-electronics self-test fault in Bosch US guidance
Bosch Dishwasher E08 — Check the Model
Meaning unconfirmed; exact model evidence required
Bosch Dishwasher E14 — Code Meaning
Flow-meter or filling-system fault
Relevant guide
Frequently asked questions
Does E05 prove that a part needs replacement?+
No. Match the model and full code first. The manufacturer definition describes the reported condition; diagnosis establishes whether a repair is needed.
Does this definition apply to every model?+
This is Bosch US guidance. Confirm the UK E-Nr and its manual before applying the definition; code meanings and fitted components can vary.
Sources and review status
Model dependent · Last reviewed 21 September 2026
- Bosch US dishwasher error-code reference
manufacturer support · other · checked 21 September 2026
The code definition and stated model/region scope. A generic water-level-sensor diagnosis is not supported by that reference.