Error code
Indesit Tumble Dryer F08 — Check the Model
The component meaning of F08 has not been confirmed for your Indesit dryer. Record the full display and exact model. Before any restart, check whether an older vented or condenser dryer needs recall action; cleaning or clearing a code does not prove it is safe.
Quick answer
F08: Component meaning unconfirmed; check model and recall status
Meaning
Component meaning unconfirmed; check model and recall status
First safe check
Record the full display from an existing photo or note. Do not run another cycle just to reproduce the warning.
Stop if
The dryer is affected by the older-dryer safety programme and its required modification or replacement is not complete.
Who to call
Contact Indesit if recall status is uncertain or the dryer is affected and unmodified. For a persistent or unexplained F08 display, use Indesit support or a qualified appliance technician; routine cleaning cannot establish a safe repair.
The code meaning and severity have not been established. Confirm the model and manufacturer guidance before attempting a remedy. Follow the model’s isolation instructions before permitted maintenance. Do not reach wet or damaged electrical parts to unplug the appliance.
What does this error code mean?
No component definition for F08 has been established for this page. Match the complete display, including leading zeros or alternating characters, to the exact model and its applicable manual.
Indesit's IDCE G45 French owner guide 19508265000_FR, page 15, describes an F display followed by one or two numbers and refers other numbers, apart from its F10/F15 maintenance advice, to service. It does not define F08. The official product label names IDCEG45B(FR); this French model context cannot establish a UK model's component diagnosis.
The UK recall concerns affected vented and condenser dryers made between 1 April 2004 and 30 September 2015, except those modified or replaced under the programme. Check the full model, serial number and modification history using the manufacturer. An affected, unmodified dryer must stay unplugged and unused until the safety action is completed. A fault code, its disappearance or routine cleaning cannot establish recall clearance.
The code and the individual dryer's recall status are separate questions. This evidence gap does not prove that the code is invalid or unused. Do not diagnose a failed part, buy a replacement component or invent a reset sequence from the number alone.
What still needs confirming?
- No component cause has been established from the manufacturer evidence reviewed.
What to do next
- Record the full display from an existing photo or note. Do not run another cycle just to reproduce the warning.
- Find the full model and serial number in accessible paperwork or on an external label; do not dismantle or move the dryer to reach a label unsafely.
- Before any restart, use the manufacturer's dryer safety checker to establish whether an older dryer is affected and whether its required modification or replacement is complete. If that status cannot be established, keep it off and ask Indesit to confirm.
- If the dryer is affected and unmodified, unplug it only if the plug is safely accessible and keep it unused until the manufacturer completes the required safety action.
- Give Indesit the exact model, serial number and full code. Ask for its applicable definition and instructions before attempting a reset or repair.
- If the warning remains or the next step needs internal access, stop and contact Indesit support or a qualified appliance technician.
Can I fix this myself?
NoA component repair is not established. Confirm the exact code/model and any required recall action before considering a restart.
Safety boundary: No internal access, electrical testing, protective-device bypass or test cycle to reproduce the fault. Affected, unmodified dryers must remain unused.
What not to do
- Do not remove panels, test wiring or bypass a protective device.
- Do not use an old manual restart instruction to override a recall warning.
- Do not treat a cleared code, clean filter or unrelated model-checker result as proof that the individual dryer is safe.
- Do not buy a heater, sensor, motor or control board solely from this display.
When to call a technician
Contact Indesit if recall status is uncertain or the dryer is affected and unmodified. For a persistent or unexplained F08 display, use Indesit support or a qualified appliance technician; routine cleaning cannot establish a safe repair.
Safety warning
Keep an affected, unmodified recalled dryer unplugged and unused. Stop for smoke, a burning smell, unusual heat, leakage or electrical tripping. Do not touch wet or hot electrical connections, remove panels, test wiring or bypass protection. Do not restart solely because the code has cleared.
Useful hub links
Other Indesit tumble dryer codes
Indesit Tumble Dryer F02 — Check the Model
Component meaning unconfirmed; check model and recall status
Indesit Tumble Dryer F03 — Check the Model
Component meaning unconfirmed; check model and recall status
Indesit Tumble Dryer F05 — Check the Model
Component meaning unconfirmed; check model and recall status
Relevant guide
Frequently asked questions
Does F08 identify a failed part?+
No failed component has been established for this page. The exact model and applicable diagnostic definition are still required.
Does this apply to every model?+
No. The reviewed IDCE G45 guide and IDCEG45B(FR) product identity are French model evidence. They do not establish a UK model definition.
Does clearing the code or cleaning the filter clear a recall?+
No. For affected older dryers, the manufacturer must establish whether the required modification or replacement is complete. Affected, unmodified dryers must stay unplugged and unused.
Sources and review status
Code meaning not yet confirmed · Last reviewed 7 October 2026
- Indesit dryer landing page — appliance mismatch noted
manufacturer support · UK · checked 21 September 2026
Material reviewed and limitation: The official dryer landing page contains washing-machine and washer-dryer instructions. It is not adequate evidence for a standalone tumble-dryer component diagnosis. This is not confirmation of a component diagnosis.
- Indesit IDCE G45 French owner guide 19508265000_FR, page 15
model manual · EU · checked 7 October 2026
Indesit's IDCE G45 French owner guide 19508265000_FR, page 15, describes an F display followed by one or two numbers and refers other numbers, apart from its F10/F15 maintenance advice, to service. It does not define F08. The official product label names IDCEG45B(FR); this French model context cannot establish a UK model's component diagnosis.
- OPSS UK unmodified tumble-dryer recall scope, 10 July 2019
government safety · UK · checked 7 October 2026
The UK recall concerns affected vented and condenser dryers made between 1 April 2004 and 30 September 2015, except those modified or replaced under the programme. Check the full model, serial number and modification history using the manufacturer. An affected, unmodified dryer must stay unplugged and unused until the safety action is completed. A fault code, its disappearance or routine cleaning cannot establish recall clearance.
- Manufacturer dryer safety notice and model checker
manufacturer support · UK · checked 7 October 2026
Current notice identifies a lint/heating-element fire concern in some dryers made April 2004 to September 2015 and directs owners to check the model. Affected dryers must not be used before modification; already modified or replacement machines are treated separately. This does not identify the cause of a numbered fault or certify an individual dryer.