Error code
Indesit Washing Machine Error Code AL05
The machine is not draining water correctly The most likely cause is blocked drain filter. Check first: check the accessible drain filter for coins, lint, or other debris.
Quick answer
AL05: what does it mean and how to fix
What does it mean?
The machine is not draining water correctly
How to fix first
Switch the appliance off and unplug it from the mains.
Why is this happening?
Blocked drain filter
When should I call an engineer?
If the code returns after basic drainage checks, the pump or internal drainage path may need an engineer visit.
What does this error code mean?
Indesit washing machine error code AL05 usually means wastewater is not leaving the appliance properly. A blocked filter, a restricted drain hose, or a pump issue are common causes.
In practice, AL05 is commonly linked to Blocked drain filter, Kinked or obstructed drain hose, or Drain pump blockage or pump fault.
Start with this safe check: Switch the appliance off and unplug it from the mains. If the code returns, the fault worsens, or the appliance does not behave normally, if the code returns after basic drainage checks, the pump or internal drainage path may need an engineer visit.
Why is this happening?
- Blocked drain filter
- Kinked or obstructed drain hose
- Drain pump blockage or pump fault
How to fix this safely
- Switch the appliance off and unplug it from the mains.
- Check the accessible drain filter for coins, lint, or other debris.
- Inspect the drain hose for kinks before trying a drain or rinse cycle.
Reset steps
- Reconnect power after the drainage path has been checked.
- Run a drain or rinse programme to test whether the fault has cleared.
When to call an engineer
If the code returns after basic drainage checks, the pump or internal drainage path may need an engineer visit.
Safety warning
Always disconnect the appliance from the mains before opening any accessible filter or checking hose connections.
Useful hub links
Related drainage fault codes
Indesit Washing Machine Error Code F18 - Control Fault
The control system has detected an internal communication or electronics fault.
Indesit Washing Machine Error Code F11
The washer has a drain pump or drainage-circuit fault and is not emptying water properly.
Indesit Washing Machine Error Code F05
The machine is not draining water correctly
Indesit Washing Machine Error Code H20
Water is not entering the machine properly
After resolving this fault, use the right wash setting to help prevent repeat issues.
Relevant guide
Frequently asked questions
Can I keep using a Indesit washing machine with AL05 showing?+
It is usually better to pause use until you have completed the safe first checks for AL05, then test the machine with a short programme.
Will resetting clear AL05 for good?+
A reset may clear a temporary interruption, but if AL05 comes back after the first safe checks, the underlying fault still needs attention.