Error code
Indesit Washing Machine Error Code F13
Temperature sensor reading issue The most likely cause is temperature sensor fault. Check first: avoid repeatedly running heated programmes while the code is present.
Quick answer
F13: what does it mean and how to fix
What does it mean?
Temperature sensor reading issue
How to fix first
Switch the appliance off and unplug it.
Why is this happening?
Temperature sensor fault
When should I call an engineer?
Persistent temperature sensor faults normally need a repair visit.
What does this error code mean?
Indesit washing machine error code F13 usually points to a faulty temperature reading or a problem in the circuit that monitors water temperature.
In practice, F13 is commonly linked to Temperature sensor fault, Wiring issue affecting the sensor signal, or Control board issue.
Start with this safe check: Switch the appliance off and unplug it. If the code returns, the fault worsens, or the appliance does not behave normally, persistent temperature sensor faults normally need a repair visit.
Why is this happening?
- Temperature sensor fault
- Wiring issue affecting the sensor signal
- Control board issue
How to fix this safely
- Switch the appliance off and unplug it.
- Avoid repeatedly running heated programmes while the code is present.
- Retry only after a full power reset.
Reset steps
- Reconnect power after leaving the machine off briefly.
- Test with a short cycle and stop if the fault returns.
When to call an engineer
Persistent temperature sensor faults normally need a repair visit.
Safety warning
Disconnect the appliance from the mains before any checks and avoid removing panels to inspect sensors internally.
Useful hub links
Related sensor fault codes
Indesit Washing Machine Error Code F03 - Temperature Sensor Fault
The washer is not getting the temperature reading it expects from the sensor circuit.
Indesit Washing Machine Error Code F11
The washer has a drain pump or drainage-circuit fault and is not emptying water properly.
Indesit Washing Machine Error Code F12
Control or wiring communication fault
Indesit Washing Machine Error Code F15
Water heating fault
After resolving this fault, use the right wash setting to help prevent repeat issues.
Relevant guide
Frequently asked questions
Can I keep using a Indesit washing machine with F13 showing?+
It is usually better to pause use until you have completed the safe first checks for F13, then test the machine with a short programme.
Will resetting clear F13 for good?+
A reset may clear a temporary interruption, but if F13 comes back after the first safe checks, the underlying fault still needs attention.