Skip to content
ApplianceFaults
Search

Error code

Vaillant Boiler F61 — Code Meaning

Control timing fault for F.061. The F.061 definition is recorded in installation manual 0020308121_04 (31 May 2023). Page 10 identifies VUI 30/40CS/1-5 (N-GB), article 0010036114, for Great Britain and Ireland. Page 73 says the fault table is used across products, so some listed codes may not appear on this product. Match the complete display and exact applicable manual; installer diagnostics are for a qualified engineer.

Last updated: 7 October 2026Boiler faults need a cautious approach

Quick answer

F61: Control timing fault for F.061

SeverityNot assessed

Meaning

Control timing fault for F.061

First safe check

Photograph the full display, including alternating characters and suffixes.

Stop if

The warning remains, the appliance is not operating normally, or the next step requires internal access.

Who to call

Contact a Gas Safe registered engineer qualified for this boiler if the warning remains, the code is not explained in the matching manual, or any internal investigation is required.

Internal diagnosis and repair require a qualified professional. Follow only the model-approved user actions described below. Keep checks outside the casing and use only a manufacturer-approved reset where the manual allows it.

What does this error code mean?

In manual 0020308121_04, F.061 reports that the control electronics (ASIC or microcontroller) do not run within the defined times. The gas-valve electrical connection and PCB are listed separately as possible causes; they are not the definition or proof that a particular part has failed.

The F.061 definition is recorded in installation manual 0020308121_04 (31 May 2023). Page 10 identifies VUI 30/40CS/1-5 (N-GB), article 0010036114, for Great Britain and Ireland. Page 73 says the fault table is used across products, so some listed codes may not appear on this product. Match the complete display and exact applicable manual; installer diagnostics are for a qualified engineer.

The German atmoTEC manual instead labels its F.61 entry as a gas-valve control fault. Retain the full display and exact manual rather than treating both spellings as a universal definition.

The reported condition does not, by itself, establish which part needs replacement.

Why is this happening?

  1. The VUI installer table lists a fault in the gas-valve electrical connection and a defective PCB as possible causes of the reported control timing fault. A qualified engineer must establish whether either applies to the actual boiler.

Safe next steps

  1. Photograph the full display, including alternating characters and suffixes.
  2. Record the full model from accessible paperwork or an external label; do not dismantle the appliance to find it.
  3. Match the source below to your exact model manual before following any code-specific instructions.
  4. If the warning persists, the model is uncertain or the next step requires internal access, stop and contact a Gas Safe registered engineer qualified for this boiler.

Can I fix this myself?

No

Use only the external checks described here. The code alone does not justify a parts replacement.

Safety boundary: Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.

What not to do

  1. Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.
  2. Do not repeatedly reset an unexplained or returning warning, or buy parts solely from this display.

When to call a heating professional

Contact a Gas Safe registered engineer qualified for this boiler if the warning remains, the code is not explained in the matching manual, or any internal investigation is required.

Safety warning

Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.

Useful hub links

Other Vaillant boiler codes

Relevant guide

Frequently asked questions

Does F61 identify a failed part?+

No. A code describes a reported condition, and the correct model documentation is needed before diagnosis.

Does this apply to every model?+

The F.061 definition is recorded in installation manual 0020308121_04 (31 May 2023). Page 10 identifies VUI 30/40CS/1-5 (N-GB), article 0010036114, for Great Britain and Ireland. Page 73 says the fault table is used across products, so some listed codes may not appear on this product. Match the complete display and exact applicable manual; installer diagnostics are for a qualified engineer.

Does F.061 mean the gas valve must be replaced?+

No. The VUI table reports control timing outside the defined times. Gas-valve electrical connection and PCB faults appear in its possible-cause column; a qualified engineer must diagnose the actual model.

Sources and review status

Model dependent · Last reviewed 7 October 2026

source checked
  • Vaillant ecoTEC plus VUI installation manual 0020308121_04, pages 10, 73 and 78

    model manual · UK · checked 7 October 2026

    F.061 reports ASIC or microcontroller timing outside the defined times. Electrical connection and PCB items are possible causes, not the reported condition. The F.061 definition is recorded in installation manual 0020308121_04 (31 May 2023). Page 10 identifies VUI 30/40CS/1-5 (N-GB), article 0010036114, for Great Britain and Ireland. Page 73 says the fault table is used across products, so some listed codes may not appear on this product. Match the complete display and exact applicable manual; installer diagnostics are for a qualified engineer.

  • Vaillant German atmoTEC exclusive / plus installation manual 0020214272_11, pages 6 and 33

    model manual · EU · checked 7 October 2026

    F.61 is labelled a gas-valve control fault on page 33 of the German atmoTEC manual. It is separate model/market context, not a universal synonym for the VUI F.061 timing definition.