Error code
Baxi Boiler E131 — Code Meaning
Power removed following an E125 or E130 fault. Baxi Italy/Austria PRIME HT manual 925.615.1, printed edition ED. 1 - 03/08, lists models 240, 280, 330, 1.120, 1.240 and 1.280 on PDF page 72. Its Italian fault table is on page 7. Match the exact model and market documentation before applying this entry to a UK boiler.
Quick answer
E131: Power removed following an E125 or E130 fault
Meaning
Power removed following an E125 or E130 fault
First safe check
Photograph the full display, including alternating characters and suffixes.
Stop if
The warning remains, the appliance is not operating normally, or the next step requires internal access.
Who to call
Contact a Gas Safe registered engineer qualified for this boiler if the warning remains, the code is not explained in the matching manual, or any internal investigation is required.
Internal diagnosis and repair require a qualified professional. Follow only the model-approved user actions described below. Keep checks outside the casing and use only a manufacturer-approved reset where the manual allows it.
What does this error code mean?
The specified PRIME HT manual’s Italian page-7 table says E131 occurs when electrical power has been removed after E125 or E130. The preceding warning matters: E131 does not by itself identify a new failed component. The page-6 alternating-display example shows why every part of a longer E-code must be recorded.
Baxi Italy/Austria PRIME HT manual 925.615.1, printed edition ED. 1 - 03/08, lists models 240, 280, 330, 1.120, 1.240 and 1.280 on PDF page 72. Its Italian fault table is on page 7. Match the exact model and market documentation before applying this entry to a UK boiler.
Owner restart controls and timing differ between boiler ranges. Use the exact owner manual or a qualified heating professional; no universal reset procedure is established here.
Why is this happening?
- The manufacturer describes: power removed following an e125 or e130 fault. The underlying cause requires assessment on the actual model.
Safe next steps
- Photograph the full display, including alternating characters and suffixes.
- Record the full model from accessible paperwork or an external label; do not dismantle the appliance to find it.
- Match the source below to your exact model manual before following any code-specific instructions.
- If the warning persists, the model is uncertain or the next step requires internal access, stop and contact a Gas Safe registered engineer qualified for this boiler.
Can I fix this myself?
NoUse only the external checks described here. The code alone does not justify a parts replacement.
Safety boundary: Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.
What not to do
- Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.
- Do not repeatedly reset an unexplained or returning warning, or buy parts solely from this display.
When to call a heating professional
Contact a Gas Safe registered engineer qualified for this boiler if the warning remains, the code is not explained in the matching manual, or any internal investigation is required.
Safety warning
Do not remove the boiler casing or work on gas, flue components, combustion settings or internal wiring.
Useful hub links
Other Baxi boiler codes
Baxi Boiler 117 — Code Meaning
High system pressure when the full display is E117
Baxi Boiler 118 — Code Meaning
Low system pressure when the full code is E118
Baxi Boiler 125 — Code Meaning
Circulation fault when the full code is E125
Baxi Boiler E110 — Code Meaning
Maximum-temperature or safety-thermostat trip
Relevant guide
Frequently asked questions
Does E131 identify a failed part?+
No. A code describes a reported condition, and the correct model documentation is needed before diagnosis.
Does this apply to every model?+
Baxi Italy/Austria PRIME HT manual 925.615.1, printed edition ED. 1 - 03/08, lists models 240, 280, 330, 1.120, 1.240 and 1.280 on PDF page 72. Its Italian fault table is on page 7. Match the exact model and market documentation before applying this entry to a UK boiler.
Sources and review status
Model dependent · Last reviewed 7 October 2026
- Baxi Italy/Austria PRIME HT manual 925.615.1, ED. 1 - 03/08, PDF pages 1, 6–7, 72
model manual · EU · checked 7 October 2026
E131: electrical power removed after E125 or E130. Page 6 explains alternating longer-code displays; page 72 identifies all six PRIME HT models. Baxi Italy/Austria PRIME HT manual 925.615.1, printed edition ED. 1 - 03/08, lists models 240, 280, 330, 1.120, 1.240 and 1.280 on PDF page 72. Its Italian fault table is on page 7. Match the exact model and market documentation before applying this entry to a UK boiler.