Appliance hub
Beko Dishwasher Fault Codes
Browse the available Beko dishwasher fault codes in one place, then open the exact code page for the documented meaning, evidence limits and safe next steps.
Definitions can vary by model and region. Some codes remain unconfirmed; check the complete display, exact model and the page's sources before taking action.
Browse the parent brand page: Beko or compare across brands in the dishwasher codes across brands.
Fault codes
20
Code categories
10
Guides linked below
0
Repair cost and model safety
Browse code categories
sensor codes
6 pages in this category. Open E04 as one example and check its model limits.
Operating-status displays
5 pages in this category. Open H2 as one example and check its model limits.
PCB and control codes
2 pages in this category. Open E08 as one example and check its model limits.
circulation codes
Open E05 for the documented meaning and its limits.
drainage codes
Open E14 for the documented meaning and its limits.
fill water codes
Open E02 for the documented meaning and its limits.
Other appliance types for this brand
Code categories in this library
Counts refer to published code pages, not how often an appliance develops a fault.
sensor (6)
operating status (5)
PCB and control (2)
circulation (1)
drainage (1)
fill water (1)
More code pages
E02 meaning and guidance
Water supply warning on the documented BDIN38540 model
E01 meaning and guidance
Water in the chassis warning on Beko BDIN38540
E03 meaning and guidance
Heating warning in the documented service-code system
E04 meaning and guidance
Turbidity-sensor warning on equipped service platforms
E05 meaning and guidance
Multiway-valve positioning warning in the documented service system
E06 meaning and guidance
Temperature-sensor fault on Beko BDIN38540
E07 meaning and guidance
Flowmeter fault on Beko BDIN38540
E08 meaning and guidance
Main-to-auxiliary-board communication warning on equipped service platforms
E09 meaning and guidance
Display-to-main-board communication warning in the documented service system
E10 meaning and guidance
Water-hardness sensor communication warning on equipped service platforms
E11 meaning and guidance
Water-hardness probe open-circuit warning on equipped service platforms
E12 meaning and guidance
Water-hardness probe short-circuit warning on equipped service platforms
All fault codes in this cluster
20 code pages currently available for this brand and appliance. A severity label does not establish whether an appliance is safe to use.
| Code | Meaning | Issue type | Severity |
|---|---|---|---|
| E01 | Water in the chassis warning on Beko BDIN38540 | overflow leak | Not assessed |
| E02 | Water supply warning on the documented BDIN38540 model | fill water | medium |
| E03 | Heating warning in the documented service-code system | heating | Not assessed |
| E04 | Turbidity-sensor warning on equipped service platforms | sensor | Not assessed |
| E05 | Multiway-valve positioning warning in the documented service system | circulation | Not assessed |
| E06 | Temperature-sensor fault on Beko BDIN38540 | sensor | Not assessed |
| E07 | Flowmeter fault on Beko BDIN38540 | sensor | Not assessed |
| E08 | Main-to-auxiliary-board communication warning on equipped service platforms | pcb control | Not assessed |
| E09 | Display-to-main-board communication warning in the documented service system | pcb control | Not assessed |
| E10 | Water-hardness sensor communication warning on equipped service platforms | sensor | Not assessed |
| E11 | Water-hardness probe open-circuit warning on equipped service platforms | sensor | Not assessed |
| E12 | Water-hardness probe short-circuit warning on equipped service platforms | sensor | Not assessed |
| E13 | Pressure-sensing / dry-running warning on equipped service platforms | pressure level | Not assessed |
| E14 | Blocked-filter warning on pressure-sensor service platforms | drainage | Not assessed |
| H2 | Water-hardness level 2 in the DTC36810W settings menu | operating status | Operating status |
| H3 | Water-hardness level 3 in the DTC36810W settings menu | operating status | Operating status |
| H4 | Water-hardness level 4 in the DTC36810W settings menu | operating status | Operating status |
| H5 | Water-hardness level 5 in the DTC36810W settings menu | operating status | Operating status |
| H6 | Water-hardness level 6 in the DTC36810W settings menu | operating status | Operating status |
| H7 | Meaning unconfirmed; exact model evidence required | unconfirmed | Not established |