Skip to content
ApplianceFaults
Search

Operating status

Beko Dishwasher H2 — DTC36810W Hardness Setting

On DTC36810W, H2 in the water-softener settings menu indicates hardness level 2. This is a user setting in the cited manual. The letters alone do not establish why another Beko dishwasher has stopped.

Last updated: 7 October 2026

Quick answer

H2: Water-hardness level 2 in the DTC36810W settings menu

SeverityOperating status

Meaning

Water-hardness level 2 in the DTC36810W settings menu

First safe check

Record the exact model and whether H2 appeared while viewing or changing water-softener settings.

Seek advice if

Contact Beko when the model or menu context cannot be matched, or a separate malfunction persists.

Who to call

Ask Beko for the applicable definition if H2 appears on another model, outside the documented settings menu, or with a separate malfunction. Arrange appropriate help for persistent faults or unsafe symptoms. The matched DTC36810W menu setting alone does not require a repair.

This is an operating message on the documented models; the code alone does not establish a breakdown. Match the complete display and appliance model before interpreting an operating status.

What does this status mean?

Beko's DTC36810W manual lists H2 as water-hardness setting 2. The table belongs to the water-softener section in Part II, page 6 (PDF page 33), where the display choices run from H1 to H6.

Established only for DTC36810W in the water-softener settings menu of the English manual supplied through Beko's Slovenia catalogue. H2 on another model or outside this menu needs its own definition. This is not UK or worldwide model coverage.

When that exact model and menu context match, this indication alone does not call for a repair or reset. If the appliance has stopped, another code is present, or H2 appears outside the documented menu, record the whole display and ask Beko to identify it before choosing a remedy.

Why is this happening?

  1. Hardness level 2 is selected in the documented DTC36810W water-softener menu.
  2. A display on another model or outside that menu needs separate identification; this page does not establish a component cause.

What to check

  1. Record the exact model and whether H2 appeared while viewing or changing water-softener settings.
  2. For DTC36810W, compare the display with Part II page 6 of the cited manual. Use that model's ordinary setting controls; this is not a service-diagnostic procedure.
  3. Before changing hardness, obtain your water supplier's hardness information and match its units to the manual's table. Do not change the level merely to clear letters from the screen.
  4. If the model or display context does not match, or the dishwasher is malfunctioning, contact Beko with the full display and symptoms instead of assuming this settings definition applies.

Does this status need a repair?

Not indicated by this status alone

The documented menu indication is a user setting; a repair is not indicated by that setting alone.

Safety boundary: Use only ordinary controls described by the matching manual. Do not remove panels, test wiring or treat a settings change as repair of a separate fault.

What not to do

  1. Do not infer a failed sensor, valve or heater from H2 in this settings menu.
  2. Do not change water hardness or repeatedly reset the dishwasher to try to repair an unexplained fault.
  3. Do not remove panels, test wiring or bypass a protective device.

Regional notes

English manual supplied through the Slovenia catalogue

The document names DTC36810W. It does not establish the display meaning for every UK dishwasher or other regional model.

Support: Match the exact local model manual and settings-menu context.

Manual reference

DTC36810W manual: Part II page 6; PDF page 33

Models covered by the cited evidence

  1. DTC36810W

When to call a technician

Ask Beko for the applicable definition if H2 appears on another model, outside the documented settings menu, or with a separate malfunction. Arrange appropriate help for persistent faults or unsafe symptoms. The matched DTC36810W menu setting alone does not require a repair.

Safety warning

Stop if there is leakage, a burning smell, unusual heat or electrical tripping. Keep clear of wet electrical connections. Do not remove panels, test wiring, force a locked door or bypass a protective device.

Useful hub links

Other Beko dishwasher codes

Frequently asked questions

Is H2 a fault on every Beko dishwasher?+

No universal fault meaning is established here. On DTC36810W, H2 in its water-softener menu identifies hardness level 2. Another model or display context needs its own manual.

Should I change H2 to make the dishwasher work?+

Do not change hardness as a fault remedy. Choose the setting only from the matching manual and your water hardness information. A separate malfunction needs its own diagnosis.

What if H2 appears during a wash or on another model?+

The cited settings table does not establish that display. Record the complete code, model and symptoms, then ask Beko for the applicable instructions.

Sources and review status

Model dependent · Last reviewed 7 October 2026

source checked
  • Beko DTC36810W English manual: Part II page 6 (PDF page 33)

    model manual · EU · checked 7 October 2026

    The model is named on the Part II cover (PDF page 28). Its water-softener table identifies H2 as a hardness setting, within H1-H6. This is a settings-menu definition, not a component fault or a meaning for other models.

Model variation note

Established only for DTC36810W in the water-softener settings menu of the English manual supplied through Beko's Slovenia catalogue. H2 on another model or outside this menu needs its own definition. This is not UK or worldwide model coverage.