Error code
Worcester Bosch Boiler Fault Code 229
The boiler has overheated or hit a high temperature limit The most likely cause is poor water circulation. Check first: check whether radiator valves and system pressure appear normal from the user controls.
Quick answer
229: what does it mean and how to fix
What does it mean?
The boiler has overheated or hit a high temperature limit
How to fix first
Allow the boiler to cool and consult the manual for any user checks that are explicitly permitted.
Why is this happening?
Poor water circulation
When should I call an engineer?
If the boiler overheats again after a single reset, arrange a qualified heating engineer.
What does this error code mean?
Worcester Bosch boiler fault code 229 usually means the boiler has shut down because temperatures rose beyond the expected limit.
In practice, 229 is commonly linked to Poor water circulation, Pump issue, or Sensor or overheat thermostat problem.
Start with this safe check: Allow the boiler to cool and consult the manual for any user checks that are explicitly permitted. If the code returns, the fault worsens, or the appliance does not behave normally, if the boiler overheats again after a single reset, arrange a qualified heating engineer.
Why is this happening?
- Poor water circulation
- Pump issue
- Sensor or overheat thermostat problem
How to fix this safely
- Allow the boiler to cool and consult the manual for any user checks that are explicitly permitted.
- Check whether radiator valves and system pressure appear normal from the user controls.
- Do not keep forcing resets if the boiler quickly overheats again.
Reset steps
- Reset the boiler only after it has cooled and any user-level checks are complete.
- Stop and seek professional help if the code returns.
When to call an engineer
If the boiler overheats again after a single reset, arrange a qualified heating engineer.
Safety warning
Do not open the boiler casing or touch internal hot components. Persistent overheating needs professional attention.
Useful hub links
Related overheat fault codes
Worcester Bosch Boiler Fault Code 232
Flame detection has been lost during operation
Worcester Bosch Boiler Fault Code E9
The boiler has overheated or hit a high temperature limit
Worcester Bosch Boiler Fault Code 224
System water pressure is too low
Worcester Bosch Boiler Fault Code 227
System water pressure is too low
Relevant guide
Frequently asked questions
Can I keep resetting a Worcester Bosch boiler with 229?+
No. If 229 returns after one standard user reset, stop there and arrange a qualified engineer if the manual gives no safe next step.
Is 229 something I can repair myself?+
Boiler faults should be treated cautiously. Stay within the user checks in the manual, and leave gas, combustion, and internal boiler repairs to a qualified professional.