Error code
Worcester Bosch Boiler Fault Code 232
Flame detection has been lost during operation The most likely cause is intermittent gas supply issue. Check first: try the standard reset once if permitted by the manufacturer.
Quick answer
232: what does it mean and how to fix
What does it mean?
Flame detection has been lost during operation
How to fix first
Check the boiler manual for any user-level checks allowed for this code.
Why is this happening?
Intermittent gas supply issue
When should I call an engineer?
Repeated flame-loss faults should be assessed promptly by a Gas Safe registered engineer.
What does this error code mean?
Worcester Bosch boiler fault code 232 usually means the boiler lit initially or tried to run, but then lost flame detection and shut down for safety.
In practice, 232 is commonly linked to Intermittent gas supply issue, Flame sensing fault, or Combustion or control issue.
Start with this safe check: Check the boiler manual for any user-level checks allowed for this code. If the code returns, the fault worsens, or the appliance does not behave normally, repeated flame-loss faults should be assessed promptly by a Gas Safe registered engineer.
Why is this happening?
- Intermittent gas supply issue
- Flame sensing fault
- Combustion or control issue
How to fix this safely
- Check the boiler manual for any user-level checks allowed for this code.
- Try the standard reset once if permitted by the manufacturer.
- Stop using the boiler if the fault returns repeatedly.
Reset steps
- Use only the standard user reset process if the manual allows it.
- Arrange professional diagnosis if the flame fault returns.
When to call an engineer
Repeated flame-loss faults should be assessed promptly by a Gas Safe registered engineer.
Safety warning
Do not attempt internal gas or combustion repairs. Persistent flame faults are not a DIY job.
Useful hub links
Related flame-loss fault codes
Worcester Bosch Boiler Fault Code 229
The boiler has overheated or hit a high temperature limit
Worcester Bosch Boiler Fault Code 233
Flame detection has been lost during operation
Worcester Bosch Boiler Fault Code 296
Flame detection has been lost during operation
Worcester Bosch Boiler Fault Code 227
System water pressure is too low
Relevant guide
Frequently asked questions
Can I keep resetting a Worcester Bosch boiler with 232?+
No. If 232 returns after one standard user reset, stop there and arrange a qualified engineer if the manual gives no safe next step.
Is 232 something I can repair myself?+
Boiler faults should be treated cautiously. Stay within the user checks in the manual, and leave gas, combustion, and internal boiler repairs to a qualified professional.